MODEL "D" TRACTOR
(For the Heavier Farm Jobs Burns Money-Saving Fuels.)
Here is a real power to do your heavier farm jobs, plowing, big volume. In the Model D Tractor you get low-cost power, simple power--power that you can use more days during the year.
Saves hundreds of dollars during its long life because it successfully burns of low-cost fuels, such as distillate, good grades of furnace oil, lighter grades of fuel oil, stove tops, etc.-fuels that cost much less that gasoline.
Pulls three 14" stubble bottoms under many conditions and four bottoms under many conditions--operates a 28" separator with all attachments and other size machines in proportion.
Compact--low, short, narrow, turns short--can be used successfully in irregular fields, in cramped quarters and in orchards.
Its side, power and ease of operation adapt it to practical and profitable use on the average sized farm.
Engine has full pressure, force-feed oiling system insuring perfect lubrication. A film of oil is maintained under pressure between bearing surfaces, preventing metal-to-metal contact--reducing fraction and wear to a minimum. Lubrication of the principal parts of the engine, transmission gears, and bearing is automatic.
Double air cleaner permits only clean air to reach cylinders.
Filtering of air, fuel and oil before reaching the engine is a safety measure that reduces wear and lengthens the life of the tractors.
All parts are readily accessible for inspection and adjustments from the outside of tractor--and in a standing position.
With the complete line of two-and four-row working equipment, this general-purpose tractor is a highly practical tractor wherever corn, cotton, potatoes, beans and other row crops are grown.
Many advanced features will be found in this new tractor. These include simple, heavy-duty, two-cylinder engine; light weight; simple, accessible construction; etc.
On Corn Belt farms, it is an ideal power unit for the man who wants to cultivate corn two or four rows at a time. It is especially desirable on hilly farms, where its adjustable treads often enables it to meet conditions better that tractors of standard design.
Equipped with a two-row cultivator, this tractor will cultivate up to 25 acres a day. With a four-row cultivator, it will cultivate up to 50 acres in a day.
This tractor is also ideally suited for use in the listed-crop sections. In potatoes and other narrow-row crops, it handles the plowing, planting, cultivating, and harvesting work at lower costs that were ever before thought possible.
THE TRACTOR WITH THE NINE IMPORTANT FEATURES FARMERS WANTED
1. ADJUSTABLE REAR WHEEL TREAD
With a range of 56 inches to 80 inches you can fit the tractor to a great variety of row widths and successfully handle a greater variety of crops.
2. FULL-VIEW EFFORTLESS VISION
The unexcelled view provided by the model "A" tractor makes possible faster, better and easier work than ever before.
3. EASY, POSITIVE STEERING
Little more than a touch of the wheel causes instant response in steering--there's no backlash of the wheel under roughest field conditions.
4. YOU CAN SIT OR STAND AT WILL
With platform and seat you can change your positions to relieve fatigue, to get above dust or get better view of work.
5. FOUR FORWARD SPEEDS
Four forward speeds ranging from 2 1/3 to more than 6 miles per hour--a practical range with which to meet the varying requirements.
6. CENTERED HITCH FOR PLOWING
When wheels are set in on rear axle, you get practically a centered hitch in plowing and this eliminates side draft.
7. SIMPLE--EASILY ACCESSIBLE
Inspection of all parts and the few adjustments required can be made by the owner from a standing position.
8. LIGHT WEIGHT--WELL BALANCED
Weighs only 3525 lbs., but develops ample power to handle a two-bottom plow and other jobs requiring proportionate power.
9. BURNS DISTILLATE
Two-cylinder, valve-in-head motor saves you from $1 to $2 a day in fuel costs alone.
NOS. 5 AND 6 TRACTOR PLOWS
Leaders in great strength and good work. Equipped with John Deere steel or Syracuse deep-chilled bottoms, famous for good for work and long wear. Beams are heavy and unusually strong. Strong braces, rigid frame connections and heavy truss bar at rear of beams maintain alignment of bottoms. Land wheel is set back--this plow works at uniform depth in uneven ground. Break-pin or cushion-spring-release hitch furnished. Strong, simple and positive power lift raises plow high and level.
Sizes: 3-and 4-bottom with 12-, 14-, or 16-inch bottoms. 5-bottom with
12- or 14-inch bottoms.
NO. 4 TRACTOR PLOW
The strongest two-bottom tractor plow ever built. Beams, beam-bracing and other important parts are of the same great strength as similar parts built into larger tractor plows. Heavy-duty, constant power lift raises bottoms to the same height regardless of dept of plowing. 23-inch clearance from beams to share points insures freedom from clogging. Rolling longside carries rear weight on greased bearing--no dragging landslide friction. Built in 12-, 14-, and 16-inch sizes; regularly equipped with cushing-spring-release hitch. For any farmer operating a "two-plow" tractor, the No. 4 is a mighty satisfactory plow.
NO. 45 TRACTOR PLOW
A lightweight, light-draft plow built for use with any "two-plow" tractor. Beams of special hard and tough steel are amply strong. Frame connections hot-riveted. John Deere steel or Syracuse deep-chilled bottoms to suit your soil. Quick-detachable shares. Simple, positive power lift--plow rises high and level on all three wheels. Hitch has wide range of adjustment up and down and to the side. Cushion-spring-release hitch protects both plow and tractor.
NO. 45-A ORCHARD TRACTOR PLOW
The ideal moldboard plow from use with small tractors in plowing orchards. Only 26 inches ting when plowing 6 inches deep. Only 37 inch wide. Gets under the low limbs up close to the row. Hitch can be offset so that plow works up close to trees, throwing either to or from the row, while tractor runs out, free from interference with limbs.
NO. 100 SERIES TRACTOR DISC PLOW
Here is a tractor disk plow that's new, different and better. Its angle steel frame bars with disc standards bolted between make a rigid, unbreakable unit. Roller bearing disk bearings mean lighter draft, longer life. Heat-treated steel disks last longer. Width of cut changed by simply angling the frame. Built in 2-, 3, 4-, 5-, 6-, and 8-disk sizes, each reducible by one disk except the 2-disk.
POWER-LIFT DISK TILLER
A cost-reducer for preparing wheat land, for working fallow, destroying weeds and for much other tillage jobs. Heaving-duty power lift, of the field-proved type, raises disks quickly for turning or transporting. Semi-floating hitch insures easy control of both tiller and tractor. Semi-aligning bearings are easily oiled, strong, longwearing and light draft. Head-treated steel discs are correctly designed for good penetration.
The Disk Tiller is built in three sizes cutting approximately 9, 7 1/2
and 6 1/2 feet. Each size is reducible to cut approximately 1 1/2 feet
less than full cut. 20-, 22 and 26-inch disks are available. Angle of gang
is variable to meet conditions.
THREE-ROW RIDGE BURSTER
A great cost-reducing implement for use with tractors of from 10 to 15 H.P. Permits one man to break down approximately 35 acres of ridges a day. New double-runner type--hugs better, pulls lighter and does better work. Rigidly braced steel frame is extra strong. Easy lever control of each disk gang. Two-row and one-row styles can also be furnished
No. 3 STEEL GANG PLOW
Made especially for hard plowing conditions of far Northwest. Construction is simple; there is nothing to get out of order. Heavy steel beams securely braced--plow has tractor plow strength. Wide wheelbase--plow will not tip. Three levers, each in easy reach of operator, whether riding or walking. Two-bottom and three-bottom sizes. Rear wheel and seat can be furnished as extras.
NOS. 62-A AND 63-A DISK PLOWS
Two- and three-disk plows cutting nine inches per disk; width of cut per disk quickly convertible to eight inches. No. 63-A (3-disk) can be reduced to two-disk plow, cutting either nine or eight inches per disk. Change in cut per disk and number of disks made by loosening clamps and shifting on main frame bar. These plows have greater clearance than usual because main frame bar is above disks. Disks are heat-treated steel. Hitch adjustable to any number of horses. Fully hitch-controlled.
NEW GANG AND SULKY PLOWS
Leading plows of their type for over thirty-five years. John Deere steel or Syracuse deep-chilled bottoms--a type for every soil. Quick-detachable shares. Pull light because properly distributed weight is all wheel-carried--no bottom or landside friction. Gang has a powerful foot lift, with an auxiliary hand lift lever; sulky has easily-operated foot lift--a small boy can operate these plows. Double-bail construction--bottoms enter ground point first and maintain uniform depth. Locking device can be set so that plow floats in frame and raises automatically when plow strikes an obstruction. Recent improvements add to the great strength of these leaders.
NO. 37 STAG SULKY PLOW
Unusually simple and strong. Frameless. Wheel brackets riveted directly to beam. Beam of special hard and tough steel will withstand severest conditions. All wheel-carried--pulls light. Rolling landside rolls rear weight.
Hitch-controlled--turns easily to right or left. Easy, simple lever
control. Bottom in type to suit your soil. Quick-detachable share.
NO. 210 SULKY PLOW
The 210 is the lightest pulling plow of its type. Rolling landside rolls rear weight--keeps bottom running true and level. Syracuse deep-chilled or John Deere steel clean-shedding bottom. Runs level and plows at uniform depth even when turning corners. The front furrow caster wheel, controlled by a lever, governs the plow on turns. Driver's hands are free except when releasing latch at turns. Right- or left-hand; rolling coulter and jointer can be furnished.
NO. 4 TWO-WAY PLOW
Ideal for plowing hillsides, irregular fields or irrigated land. Leaves no dead furrows or back ridges; plow back and forth until you reach the other side, turning all the soil one way. Special features make this the easiest plow to control you every saw. Get on the seat and try it. Sizes: 12-, 14-, and 16-inch. Bottom equipment to meet your requirements.
NO. 2 TWO-WAY TRACTOR PLOW
Doubles plowing capacity in two-way plow regions. Plow always centers with the working gang. Positive power lift wheel in furrow lifts working gang. With both gangs lifted, the plow centers behind tractor--easy to turn or transport. Cushion-spring-release hitch protects both plow and tractor. Screw cranks adjust plowing depth from three to two inches. Convenient lever for leveling. 14-inch bottoms.
Ample throat room and close-fitting joints prevent clogging. Choice of white iron or tempered steel moldboard adapts them to a variety of soils. Two-piece truss-style beam is extra sturdy. Renewable shoe protects standard and serves as landside.
GENERAL-PURPOSE PLOW--GPN SERIES
Shape of moldboard and share adapts this plow for thorough work and light draft in clover, timothy or blue-grass sod, or in old ground. Good also for difficult plowing in heavy, sticky soils. High-quality steel construction. Sizes 12-, 14-, and 16-inch.
BLACK-LAND PLOW--BR SERIES
Made especially for stiff black, waxy soil. Extra strong construction through out. Share has long sharp point and correct suction, insuring good penetration and steady and light running. Moldboard shaped properly for good shedding. Extra strong steel frog and high curved double-headed steel beam. Sizes: 7-, 8-, 9-, 10-, and 11-inch.
MIXED-LAND PLOW--B SERIES
Sheds clean, turns the furrow slices properly and makes a good seed bed. Moldboard of hardened soft-center steel is double skinned to resist wear. Shares in variety to suit different soils can be furnished. High-quality material throughout. Sizes: 8-, 9-, 10-, 12-, and 14-inch.
NOS. 1341B-1441B SERIES WALKING PLOWS
Built strong; bottom parts designed for sulky and gang use as well.
Interchange of chilled and steel wearing parts make these plows adaptable to any soil condition. Bottoms of correct shape for general-purpose work. Good penetration; steady running; durable; heavy malleable frog; quick detachable share; rolled foot beam of standard type. Right and left-hand styles.
HARROW AND WEED DESTROYER
Special process, heat-treated spring-steel teeth penetrate deep, thoroughly pulverizing soil and tearing out the weeds. This harrow is particularly adapted for work in sandy, gravelly or stony ground where deep cultivation is required. Trash and weeds work to center and pass out through opening between sections, preventing loading and choking at this point. Teeth are instantly adjusted by means of convenient levers to meet different soil conditions. Frames and tooth bars are made of channel and angle-bar steel. Teeth are clipped onto bars. Runners have steel protective shoes. Adjustable hitch regulates teeth at the front and rear to work at same depth regardless of size of team or length of tugs. The weed destroyer is similar in design, but with fewer teeth.
HARROW AND WEED DESTROYER
Real heavy-duly equipment for use with tractors. Special-process, heat-treated spring-steel teeth are locked securely to the tooth bars by means of sturdy clamps; there are no boltholes in teeth to weaken these important parts. Sections are hitched independently, thus assuring easy clearing of trash, and thorough work. Front shoes swivel for easy turning; all shoes have replaceable steel runners. Levers may be shifted from front to rear the adapting heavy-duty for use with horses. Wheel-carried tractor harrow hitch can be furnished. The heavy-duty Weed Destroyer has the same general features; it has fewer teeth but wider spacing to provide greater clearance for trash
STEEL-FRAME STALK CUTTER
This stalk cutter will do good work in all conditions, whether the ground is frozen or muddy. The driver can shift the entire weight of the machine, and his own weight is well, on the knife head, or lessen the weight, as desired. Powerful springs reduce jar and cause knives to chop instead of crush the stalks. Spring hitch relieves strain on horses. Double-edged knives can be reversed when one side is dull. One lever raises both the knives and the stalk hooks. Furnished in single- or double-row.
MODEL B DISK HARROW
Extremely flexible. Penetrates, pulverizes and packs the soil its entire width. Each gang works independently--one gang can pass over obstructions without lifting the other from its work. Pivoted yoke controlled by third level and powerful pressure spring holds gangs to their work in all conditions. Double-bar steel gang frames. Heat-treated steel disks. Rear section and tractor hitch can be furnished.
PONY TRACTOR DISK HARROW
Use with any standard tractor. Quickly converted into single- or double-action, horse-drawn harrow. Tongue truck can be furnished when horses are used. Automatic yielding lock coupling holds rear discs to their work. Gangs work independent of each other. Entire harrow is not raised from ground when one gang passes over an obstruction. Third level on front section controls powerful spring and pivoted yoke, which hold disks to their work. Aligning device insures thorough work. Double-bar gang frames, front and rear. Heat-treated steel disks. Scrapers that can be oscillated. Wider, heavier frame strengthened throughout against strain.
MODEL L TRACTOR DISK HARROW
Front and rear sections are angled by independent cranks convenient to tractor operator. Automatic yielding lock coupling, an exclusive feature, helps rear disks to cut ridges left by front gangs. Gangs work independently--soil is worked full width; no binding or twisting of frame. Pivoted yoke and pressure spring controlled by crank allow light or heavy pressure on disks. Aligning device provides means of locking rear disks in position for best work. Adjustable, oscillating scrapers keep disks clean. Heavy angle steel frame braces. Heat-treated steel disks. Double-bar gang frames.
MODEL S SINGLE-ACTION
TRACTOR DISK HARROW
This is a big-capacity, heaving-duty tractor disk harrow, made in 15- and 21-foot sizes, capable of disking from 50 to 100 acres a day. Operated entirely from tractor. Tractor does all the work of angling and straightening the gangs. End gangs fold over reducing the 15-foot size to 10 1/2 feet and the 21-foot to 14 feet.
No. 999 CORN PLANTER
The "999" Corn Planter with Natural Drop Seed Plates can be furnished with tongue truck, or the truck can be purchased separately and put on by the owner. The tongue truck eliminates neck weight, insures a better check, a more even depth of planting, straighter rows; reduces side slip on hillsides, and makes turning easier at row ends.
Variable drop device enables you to drop two, three or four kernels in the hill, as desired, simply by shifting foot lever. Safety fertilizer attachment available.
NO. 110 COTTON AND CORN PLANTER
The latest model riding planter. The Saw-Tooth Type Steel Picker Wheel picks out cottonseed one at a time in any quantity desired. Both ground wheels drive seeding mechanism, keeping machine in perfect alignment. Shank has ample adjustment for planting upon highest beds or in listed furrows. Feed is gear driven. Peanut attachment does not damage peanut seed. Can also be furnished with fertilizer distributor, press wheel, and three-piece middlebreaker bottom.
NO. 227 ONE-HORSE CORN DRILL
It has the same accurate drop as is used on the popular two-row planters. Frame and drive wheel made of steel--durable; will stand hard usage. Plants can be furnished for planting practically any kind of corn, peas, beans and other seeds.
Available with either safety fertilizer or pea attachment. Pea attachment will plant peas in the same hill with the corn, or alternately with the corn.
NO. 155 COTTON AND CORN PLANTER
Plants one cotton seed at a time in any quantity per acre desired. Plants corn, peanuts, peas, beans, sorghum and similar seed--remove cotton spider and insert proper seed plate and cut-off. One corn cut-off handles great variety of seeds. Cotton seeds are picked from hopper by narrow Saw-Tooth Type Steel Picker Wheel. No clogging--lint and trash removed with the seed. Furnished with runner opener having either gauge shoe or sweep, as shown. Swinging hitch can also be furnished instead of stiff hitch.
COMBINED COTTON AND CORN PLANTERS
Equipped with the Saw-Tooth Type Steel Picker Wheel, it plants a single cotton seed at a time, or more, if desired. All lint and trash are picked out of hopper to prevent clogging. John Deer natural-drop seed plates--the accurate dropping mechanism used on the popular two-row planters in Corn Belt--handle corn, sorghums, peanuts, and many other kinds of seed.
No. 347 has shovel opener and coverers; No. 349 has runner opener and knife coverers; No. 350 has shovel opener and knife coverers. All three of these planters have pitman drive. Press wheel or pea and bean attachment can be furnished.
660 SERIES LISTER
You can adjust row spacing quickly to 36, 38, 40 or 42 inches; level both bottoms instantly with one lever, regardless of position of frame; adjust bottoms for proper penetration and suction with handy screw device; regulate depth of covering without leaving seat or stopping team. Cotton drop and corn drop are the most accurate made. Disk or shovel coverers.
NO. 640 SERIES LISTERS
Two-row listers for planting cotton, corn, beans, etc. Cotton drop is the picker-wheel type; corn drop is the"999", famous for its accuracy. John Deere bottoms. Disk or shovel coverers. Row spacing convertible to 36, 38, 40 or 42 inches. Simple lever control; both bottoms are hung on the bail. Tilting this bail with leveling lever levels bottoms. Pea attachment can be furnished.
NO. 630 SERIES LISTERS
A heavy-duty three-row lister, field-proved and successful in every respect. Does good work in either single-listing or relisting. Row spacing adjustable to 36, 38, 40, 42 or 44 inches. The "999' corn drop and picker-wheel cotton drop--both famous for accuracy. Has John Deere bottoms, famous for good work and long wear. Coverers quickly adjustable for covering shallow or deep. Simple, positive power lift.
(Plain or Fertilizer)
For planting between rows of corn or for small plots of ground. Adjustable for 6-, 7- and 8-inch spacing. Swinging outer disks prevent damage to corn, and insure planting all the ground. Adjustable gate fluted force-feed; long-wearing disk bearings. Grass-seeder attachment can be furnished if wanted.
(With Galvanized Steel Box)
Great strength, light weight, perfect balance, light draft and big capacity are features that contribute to the greater value and efficiency of these new drills with heavy galvanized, rust-resisting steel box. The steel box holds 72% more grain than the wood box formerly used--one bushel for every foot of box length.
Improved feeds in either fluted or double-run styles handle a large variety of seed in any quantity per acre, and insure a positive, even flow. Rear-delivery disk boots guide the seed to the bottom of furrows of uniform depts.
Furrow openers for all field conditions--sight-disk, double-disk, shoe and hoe; also single-disk deep furrow opener. Horse hitch or tractor hitch. Grass seeding attachment and fertilizer attachment available. All standard sizes.
This Combination Fertilizer-Grain Drill pulverizes the soil, drills in the seed and fertilizer, and covers both--all in one trip over the field. Made in sizes up to 17 x 7; with horse hitch or tractor hitch.
LIME AND FERTILIZER DISTRIBUTORS
Covers 8 feet of ground; carrying capacity, 10 bushels. Direct wheel drive--each wheel drives half the machine. Wood or steel wheels. The Model A Fertilizer Distributor has star force-feeds for distributing fertilizers and other materials in quantities from 50 to 5000 pounds per acre; the Lime and Calcium Chloride Distributor with rotary wing feeds applies lime, calcium chloride and fertilizes in quantities from 200 to 8000 pounds per acre; can be specially equipped for spreading calcium, sand, cinders and ashes on roads. Takes pneumatic tries. We do not furnish the tires.
FOUR-ROW BEET AND BEAN PLANTER
Save valuable time with the four-row beet and bean planter. Plants in uniform rows of 20, 22, 24, 26 or 28 inches, or in wide and narrow rows, 16 and 24 or 18 and 26 inches. Has large hoppers and every accurate seed-dropping mechanism, being equipped with John Deere Natural-Drop Seed Plates. Safety fertilizer attachment and irrigating attachment can be furnished if wanted.
TWO, THREE AND FOUR-ROW
BEET AND BEAN CULTIVATORS
Unusual strength and ease of adjustment and operation are the outstanding features of the Beet and Bean Cultivators. The tool bars are made of a flat top bar and heavy T-iron bottom bar. The tools can be clamped either to front or rear of tool bars. Large variety of tools.
Accuracy is assured whether you plant whole or cut, treated or untreated seed. A simple gravity feed insures just the right amount of seed in the picking bowl for efficient operation of the double-pointed pickers. Agitators of special design, prevent bridging of seed in the hopper. Flexible steel spring-trips release each seed-piece at just the right time; none jarred loose by shock. Sprockets available for spacing seed 9, 11, 13, 15, 18, 22, 26, and 30 inches. Smooth-running steel roller chain insures uniform drive without lost motion.
One- and two-row sizes with or without highly efficient fertilizer attachment.
These famous mechanical diggers dig the potatoes with a minimum of mechanical injury. Shovel, of crucible plow steel, scours and works in varied conditions without bending or breaking. Main sides are built up of two steel angles riveted together. Furnished in one-row size with ground or engine drive, and one- or two-row Tractor drive, with equipment to meet your requirements.
For early cultivation of all kinds of row crops, small grain, alfalfa, etc. Strong, easy pulling, easily operated.
Two sizes: Eight-foot, two-row and eleven-foot, flexible three-row. Malleable iron or steel wheels.
Two-row hoe can be furnished with poles for either two- or three-horse hitch, or with tongue truck for horse or tractor hitch. 11-foot flexible three-row hoe with either four-horse or tractor hitch. Grass seeder attachment and hook-ups for operating two or three hoes in combination can be furnished.
DF WALKING CULTIVATOR
Balanced frame, with correct attachment for lifting springs--light or heavy rigs handle easily. Pole does not fly up when heavy rigs are raised. Connecting point between lifting spring yoke and beam coupling can be raised or lowered for penetration to suit soil conditions. Simple depth-regulating device. Hugging device makes it easy to keep rigs parallel with row, no matter how shovels are set. High, adjustable arch. Rigs styles to meet the requirements of different sections.
Especially designed for use in narrow or wide rows--the ideal cultivator for diversified farming. Wheel track quickly adjustable to cultivate rows from 28 to 48 inches wide. Easy control to meet all field conditions by means of master lever, independent depth levers, tilting lever and spacing lever. Quick dodge--pedal guide pivots wheels and shifts rigs. Open frame-work through center gives good view of work ahead of shovels. Strongly built--frame does not sag; wheels do not spread. Great variety of rig styles to meet conditions in every section of the country.
VB LEVERLESS CULTIVATOR
Turning a convenient tail nut within handy reach of the operator adjusts depth quickly and easily. Specially-designed coupling sleeve makes the VB balance properly without adjustment of the lifting springs. Wheels are extra strong, with dust-proof and oil-tight boxes. Various style rigs and shovels can be furnished.
NH TWO-ROW CULTIVATOR
Two-Row Cultivators are famous for their good work and easy operation. When you are on the NH, the type built especially for checked corn, you can see thee hills at once--the hill you are cultivating, the hill just ahead, and the hill just finished. Other popular features are the handy spacing lever with which you can space the rigs in or out as you drive along and a handy tilting lever with which you can tilt the rigs forward or back. .As each to operate as a single-row. One long maser lever raises all rigs.
JF DISK CULTIVATOR
(Three Cultivators in One)
Can be furnished with disks, shovels or spring teeth. Easy, wide-range, foot-controlled dodge. On straight rows, crooked rows or side-hills, it is easy to meet all conditions. Powerful penetration because hitch is directs from gangs. All gang adjustments are simple and easy. Strong in every part; frame never sags; wheels always stand up straight.
NO. 400 SERIES TWO-ROW
LISTED CORN CULTIVATOR
Follows the trenches perfectly and has these distinctive advantages--easier adjustments; a variety of tillage equipment to meet every requirement; the kind of work you want, regardless of which type of equipment you use. Non-rocking bolster plate prevents any tendency of gangs to climb ridges. When you see the tillage equipment, --how easily and quickly any type of equipment can be put on and how quickly you can make any desired adjustment, you will be sure to want a "400".
THREE-, FOUR-, AND FIVE-ROW
TRACTOR CULTIVATORS FOR LISTED CORN
[note-no picture of this]
Especially designed to speed up the work and cut costs by taking full advantage of tractor speed and power. Follow trenches perfectly when tractor is on the ridges. Great variety of tillage equipment permits work under all conditions. Bolster plate keeps gangs from rocking. Any adjustment for disks, shovels or wheels can be made by simple clamp adjustments. Three-row quickly convertible to five-row by adding two gangs; five-row reducible to three-row by removing outer gangs. Four-row designed for wide-tread type tractors. Daily capacity varies from 25 to 40 acres with the three-row, to 35 to 60 acres with five-row.
The new No. 4 Enclosed gear Mower is a thoroughly modern mower, combining all of the good qualities of previous mowers with new and distinctive features. All gears are fully enclosed and run in a bath of oil. Axle bearings, wheel bearing, gear bearings, counter-shaft and pitman shaft bearings are oiled automatically from the gear case. High, easy foot lift; extremely high hand lift. Direct transmission of power through two pairs of balanced gears reduces draft and wear. High-grade roller, ball and bronze bearings and wide-tread, wide-tired wheels mean lighter draft. Flexible cutter bar, quick acting clutch, great strength and ease of operation are outstanding qualities. Furnished in 4 1/2-, 5-, 6- and 7-foot sizes. Tongue truck furnished as extra.
Tractor owners will want a Tractor-Drawn or a Power-Driven Mower. They are built specially for fast, big-capacity mowing. Built in 7-, 6-, 5- and 4 1/2-foot sizes.
The cylinder is spring-suspended at both ends and runs on roller bearings; bronze bearings are used on the universal and pinion shaft.
New tooth bars of heavy steel tubing do not require wood reinforcement.
Cylinder support is clamped to the center shaft and braces each one of the tooth bars.
Strippers are held rigid and aligned by a steel strap that ties the strippers together.
Left-hand wheel can be moved out on axle for raking beans or extra heavy
hay without reversing the wheel or drive dog.
NEW IMPROVED SULKY RAKE
The teeth are not locked down when gathering hay, thus avoiding breakage
in uneven fields. Once the hand lever is set in forward position, the teeth
are kept proper contact with the ground without further attention from
the operator. Horses walk back of the teeth so that hay can be gathered
close to fences or ditches. Teeth gather hay properly from swath, windrow
or cock. Cushion springs allow teeth to yield and pass over obstructions.
Caster wheels make rake easy to guide. Also furnished in the Alfalfa Power-Lift
and Jumble Power-Lift sizes. The Alfalfa Rake is designed to handle a larger
quantity of hay than the regular, and the Jumbo has an even greater capacity
than the Alfalfa type.
NOS. 1 and 2 HAY STACKERS
Maximum height of pitcher-tooth delivery: No. 1, 19 feet 3 inches; No. 2, 24 feet 2 inches.
Height stacks can be built: No.1, 25 feet; No. 2, 30 feet.
DOUBLE-CYLINDER HAY LOADER
Handles hay gently from ground to top of load. Spring-floated gathering
cylinder gets all the clean hay in uneven fields; leaves the trash. Handles
the lightest swath or heaviest windrow; light draft. All-steel frame with
hot-riveted corner plates. Hinged carrier and be adjusted up or down by
the man on load. Makes loading easy in windy weather.
SINGLE-CYLINDER HAY LOADER
RAKER BAR-CYLINDER HAY LOADER
The Double-Cylinder Loader is a dependable loader with floating cylinder,
automatic capacity adjustment, and other features that mean good work.
TWO-ROW CORN PICKER
Wide range of adjustment, seventeen roller and ball bearings, perfect delivery of cut corn to binder attachment, and unusual strength throughout, are other important features.
Stiff pole, tractor hitches and bundle elevator can be furnished.
POWER CORN BINDER
(For quick, Easy Storing of Ear Corn and All Small Grain)
SMALL GRAIN ELEVATOR
NO. 5-A COMBINE
MODEL E SPREADER
Efficient one-man lime spreading attachment, endgate attachment, brake
and tractor hitch can be furnished. Steel pole and eveners are regular
STATIONARY GRAIN ELEVATOR
If pit installation is desired, cross-conveyer can be furnished.
Built in short sections of steel angles and heavy galvanized sheet steel; has extra strong steel chains, roller bearings and pressure lubrication.
Power: Horse power, gas engine or electric motor.
ONE- AND TWO-HOLE ALL-STEEL HAND CORN SHELLER
NO. 5 CYLINDER CORN SHELLER
NO. 9 CYLINDER CORN SHELLER
NO. 10 CYLINDER SHELLER
All-steel construction, special heavy-duty, friction-saving, long-lived
bearings throughout sheller, high pressure lubrication, case-hardened roller
chains on all drive sprockets, swivel feeder, enclosure of entire right-angle
drive assemble--these are outstanding No. 10 qualities.
TWO-, FOUR-, AND SIX-HOLE SPRING CORN SHELLERS
The New Four- and Six-hole Dustless Spring Shelters are built especially for large corn growers, neighborhood shelling rings or job shellermen. Built of galvanized sheet steel. Will do most efficient job of shelling and cleaning present day corn. Improved shelling mechanism, greater cleaning area, combined with dust and shuck separator assures clean shelling, clean corn and a clean machine to work around.
Other quality features are: Adjustable feeder; adjustable shelling spouts; feeder throw-out operated from either side of machine; 16-ft. swinging cob stacker; roller bearings; high pressure lubricate.
Capacity: 2-hole--75 to 125 bushes per hour with 5- to 10- H.P. Engine.
4-hole--150 to 250 bushels per hour with 10- to 12- H. P. Engine. 6-hole--250
to 350 bushels per hour with 12- 14- H. P. Engine.
HEAVY-DUTY FARM WAGON
This wagon is well-known for its long life and light draft.
FARM TRUCKS AND GEARS
Farm Truck, Wood Wheels
Farm Truck, Steel Wheels
No. 802 All-Steel Gear
Beet or Teaming Gear
Farm Truck Trailer
There is a Farm Truck for every purpose. All wood trucks have hickory axles, and the higher-priced trucks have round truss rods. All wood stock is air-seasoned. Best of workmanship and finish. All paints used on these Gears, Trucks and Boxes are ground in John Deere mills.
Gears are built of thoroughly air-seasoned oak and hickory. Only such materials as will pass the most rigid inspection for quality are used. These gears have heavy sand- and dust- proof skeins, full-clipped gears, deep rear bolsters, and steel reach plates. Wheels have oak hubs, oak or hickory spokes and bent oak rims or sawed oak felloes. Tires are set hot with special hydraulic machines.
Truck Trailers are built with strong, all-steel chassis; extra-heavy wheels with Timken roll bearings; heavy-duty tires; auto steering; and pressure-gun lubrication. Furnished in two types--light and heavy.
The No. 802 All-Steel Gear is a light-weight, economical gear built strong enough for use with tractor.
Every Wagon, Gear, Truck and Trailer is fully guaranteed against breakage
due to defective material or poor workmanship for one year from date of
purchase. Wagon Boxes and Shoveling Boards are quality-built throughout
to give extra years of service.
DIRECT-DRIVE PUMPING OUTFIT
HANDY FARM MIXER
Back To The
Farmers Pocket Ledger Introduction
On To Part II